Axis Q86 Series, Руководство по установке

Страница: 33 / 168

AXIS Q86 Series
Function Pin Notes Specifications
DC ground
1
0 V DC
DC output 2 Can be used to power auxiliary equipment.
Note: This pin can only be used as power out. 12 V DC
Max load = 50 mA
Digital input – Connect to pin 1 to activate, or
leave floating (unconnected) to deactivate. 0 to max 30 V DC Configurable
(Input or
Output)
3–
6
Digital output – Internally connected to pin 1 (DC
ground) when active, and floating (unconnected)
when inactive. If used with an inductive load, e.g.,
a relay, connect a diode in parallel with the load,
to protect against voltage transients.
0 to max 30 V DC,
open drain, 100 mA
Example
1
DC ground
2
DC output 12 V, max 50 mA
3
I/O configured as input
4
I/O configured as output
5
Configurable I/O
6
Configurable I/O
Power connector
4-pin terminal block for power input.
24 V AC/DC power connector
NO NO NOTICE TICE TICE
This section is valid for products powered by 24 V AC and 24 V DC only.
33
EN