Axis Q7404 Скачать руководство пользователя | Manualshive

Страница: 48 / 62

background image

AXIS Q7404 Video Encoder

System Options

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network
prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under

System Options > Network > QoS

. Using DSCP (Differentiated Services Codepoint) values, the

Axis product can mark the following types of traffic: live video, live audio, event/alarm traffic and management traffic.

Note

Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the
group of devices and management station running SNMP. Community names are used to identify groups.

The Axis product can be configured to support SNMP on the

System Options > Network > SNMP

page.

Depending on the level of security required, select the version on SNMP to use.

SNMP v1/v2

provides the lowest level of security. The community name can be specified as a password for read or read/write

access to all supported SNMP devices. The default password for the

Read community

is public and the default password for the

Write community

is write.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2

are used by the Axis product to send messages to a management system on important events and status

changes. Check

Enable traps

and enter the IP address where the trap message should be sent and the

Trap community

that

should receive the message.

The following traps are available:

•

Cold start

•

Warm start

•

Link up

•

Authentication failed

SNMP v3

provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be enabled, see

HTTPS, on page 42

. To enable SNMP v3, check the box and provide the initial user

password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see

Reset to Factory Default Settings, on page 52

.

UPnP

TM

The Axis product includes support for UPnP

TM

. UPnP

TM

is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

UPnP

TM

can be disabled under

System Options > Network > UPnP

TM

.

RTP/H.264

The RTP port range and multicast settings are configured under

System Options > Network > RTP

.

48

«
...
46
47
48
49
50
...
»

Содержание Q7404































































Отзывы:

Нет отзывов

Похожие инструкции для Q7404

Бренд: IDK Страницы: 79

Fezz Equinox EVO

Бренд: Lampizator Страницы: 5

Бренд: Power Fist Страницы: 2

Бренд: B&B Electronics Страницы: 5

Бренд: Thor Broadcast Страницы: 9

Бренд: AceWav Страницы: 2

Giga-MiniMC 856-10730-RX

Бренд: B&B Electronics Страницы: 15

Бренд: ENC Страницы: 57

Бренд: Growatt Страницы: 25

Helios III Series

Бренд: CNBOU Страницы: 27

Бренд: Photosonix Страницы: 12

Бренд: Audioplex Страницы: 2

Бренд: Aurora Design Страницы: 2

Бренд: HEIDENHAIN Страницы: 26

Бренд: Datavideo Страницы: 8

Indigo Wallbox Q-Down

Бренд: Crystal Vision Страницы: 68

Бренд: TV One Страницы: 12

Бренд: Lindy Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды