Axis Q6055-S, Руководство по установке

Страница: 22 / 34

AXIS Q6055-S PTZ Dome Network Camera
Media converter switch connectors
NO NO
NOTICE
TICE
TICE
The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the network shall be intended for their specific use. Make sure that the
network devices are installed in accordance with the manufacturer’s instructions. For
information about regulatory requirements, see
Electromagnetic compatibility (EMC) on
page 32 .
Important
The media converter switch does not support hotswapping. Disconnect power from the
switch before swapping cameras. An attempt to hotswap could cause the switch to freeze,
in which case it must be restarted.
Camera connectors
Power connector
Two 2-pin terminal blocks for power output (pin 4
is not used).
Function Pin Notes
24 V DC
1, 2
Power out to camera
0 V DC (-)
3
DC
output
N/A
4
N/A
Network connector
Two 2-pin Ethernet terminal blocks.
22