Axis Q1961-TE, Руководство пользователя

Страница: 20 / 54

AXIS Q1961-TE Thermal Camera
The device interface
Input type : Select the type of input, for instance if it’s a microphone or line-in.
Power type : Select power type for your input.
Apply changes : Click to apply your selection.
Separate gain controls : Turn on to adjust the gain separately for the different input types.
Automatic gain control : Turn on to dynamically adapt the gain to changes in the sound.
Gain : Use the slider to change the gain. Click the microphone icon to mute or unmute.
Stream
Encoding : Select the encoding to use for the input source streaming. You can only choose encoding if audio input is turned on. If
audio input is turned off, click Enable audio input to turn it on.
Audio mixer
Input
Ten Band Graphic Audio Equalizer : Turn on to adjust the level of different frequency bands within an audio signal.
Voice enhancement : Turn on to adjust the voice content in relation to other sounds.
Recordings
Click to filter the recordings.
From : Show recordings done after a certain point in time.
To : Show recordings up until a certain point in time.
Source : Show recordings based on source.
Event : Show recordings based on events.
Storage : Show recordings based on storage type.
Ongoing recordings: Show all ongoing recordings on the camera.
Select to start a recording on the camera.
Choose which storage device to save to.
Select to stop a recording on the camera.
Triggered recordings will end both when manually stopped and when the camera is shut down.
Continuous recordings will continue until manually stopped. Even if the camera is shut down, the recording will continue
when the camera starts up again.
20