AXIS Q1715 Block Camera
Additional settings
Image with WDR.
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to
Settings > Image > Wide dynamic range
.
2. Turn on WDR.
3. Use the
Local contrast
slider to adjust the amount of WDR.
4. Use the
Tone mapping
slider to adjust the amount of WDR.
5. If you still have problems, go to
Exposure
and adjust the
Exposure zone
to cover the area of interest.
Find out more about WDR and how to use it at
Stabilize a shaky image with Electronic Image Stabilization (EIS)
Electronic Image Stabilization (EIS) can be used in environments where the product is mounted in an exposed location and subject to
vibrations, for example, wind or passing traffic. Turn on EIS to get a smoother and steadier image without blur.
EIS also reduces the file size of the compressed image and lowers the bitrate of the video stream.
Note
When EIS is turned on the image is cropped slightly, lowering the maximum resolution.
1. Go to
Settings > Image > Image correction
.
2. Turn on EIS.
Monitor long and narrow areas
Use corridor format to better utilize the full field of view in a long and narrow area, for example a staircase, hallway, road, or tunnel.
10
