Axis P8513, Руководство по установке

Страница: 14 / 80

Page 14 AXIS P85 Network Camera Series
Resetting to the Factory Default Settings
This will reset all parameters, including the IP address, to the Factory
Default settings:
1. Disconnect the network cable.
2. Remove the rubber cap from the control button hole.
3. Using an appropriate object such as a small screw driver, press and
hold the Control button and reconnect the network cable.
4. Keep the Control button pressed for at least 15 seconds.
5. Release the Control button.
6. Wait for at least 1 minute for the process to complete.
7. The camera has now been reset.
8. Re-assign the IP address, using one of the methods described in this
document.
It is also possible to reset parameters to the original factory default
settings via the web interface. For more information, please see the
online help or the user’s manual.
Further information
The user’s manual is available from the Axis Web site at www.axis.com.
Tip!
Visit www.axis.com/techsup to check if there is updated firmware
available for your network camera. To see the currently installed
firmware version, click the
Basic Configuration
menu item in the
product’s web page.