background image

AXIS P5654-E Network Camera

Find the device on the network

Find the device on the network

To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both
applications are free and can be downloaded from

axis.com/support

.

For more information about how to find and assign IP addresses, see the document

How to assign an IP address and access your

device

on the device page at

axis.com

.

Access the device

1. Open a browser and enter the IP address or host name of the Axis device.

If you have a Mac computer (OS X), go to Safari, click Bonjour and select the device from the drop-down list. To add
Bonjour as a browser bookmark, go to

Safari > Preferences

.

If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network.

2. Enter the username and password. If you access the device for the first time, you must set the root password. See

Set a

new password for the root account on page 4

.

3. The live view page opens in your browser.

Secure passwords

Important

Axis devices send the initially set password in clear text over the network. To protect your device after the first login, set
up a secure and encrypted HTTPS connection and then change the password.

The device password is the primary protection for your data and services. Axis devices do not impose a password policy as they
may be used in various types of installations.

To protect your data we strongly recommend that you:

Use a password with at least 8 characters, preferably created by a password generator.

Don’t expose the password.

Change the password at a recurring interval, at least once a year.

Set a new password for the root account

Important

The default administrator username is

root

. If the password for root is lost, reset the device to factory default settings.

1. Type a password. Follow the instructions about secure passwords. See

Secure passwords on page 4

.

2. Retype the password to confirm the spelling.

3. Click

Create login

. The password has now been configured.

4

Содержание P5654-E



















Отзывы: