Axis P3707-PE, Руководство пользователя

Страница: 51 / 54

AXIS P3707-PE Network Camera
Troubleshooting
Poor rendering of H.264
images Ensure that your graphics card is using the latest driver. The latest drivers can usually be
downloaded from the manufacturer’s website.
Color saturation is different
in H.264 and Motion JPEG Modify the settings for your graphics adapter. Refer to the adapter’s documentation for more
information.
Lower frame rate than
expected See Performance considerations on page 53 .
Reduce the number of applications running on the client computer.
Limit the number of simultaneous viewers.
Check with the network administrator that there is enough bandwidth available.
Check in the AMC Control Panel (H.264 tag) that video processing is not set to Decode only
key frames .
Lower the image resolution.
Set a Capture Mode that prioritizes frame rate. Changing the capture mode to prioritize frame rate
might lower the maximum resolution depending on the product used and capture modes available.
Product does not start up
Product does not start up If the product does not start up keep the network cable connected and re-insert the power cable
to the midspan.
Video and image problems, general
Black image with text
indicating inadequate power
supply Check cables and restart power sourcing equipment.
Image unsatisfactory Check the video stream and camera settings under Setup > Video > Video Stream and Setup >
Video > Camera Settings .
Storage and disk management problems
Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other
read or write problems occur. To identify the source of the problem, check the
System Log under
System Options > Support > Logs & Reports . Depending on the problem, it might be necessary to
re-mount the storage device.
For information on how to set up a storage disruption alarm, see About events on page 29 .
Video cannot be recorded
Check that the SD card is not write protected (that is, read only).
SD card cannot be mounted Reformat the SD card and then click Mount.
NO NO
NOTICE
TICE
TICE
Formatting the card will remove all content, including all recordings, from the SD card.
51