AXIS P3343-V Fixed Dome Network Camera
System Options
Reset to factory default settings
This will reset all parameters, including the IP address, to the factory default settings:
1. Disconnect power from the product.
2. Press and hold the Control button and reconnect power (see
Hardware overview, on page 5
).
3. Keep the Control button pressed for about 15 seconds until the Status indicator
fl
ashes amber.
4. Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). The
product has been reset to the factory default settings. The default IP address is
192.168.0.90
5. Re-assign the IP address.
It is also possible to reset parameters to factory default via the web interface. Go to
Setup > System Options > Maintenance
.
47