Axis P1365 Mk II, Руководство пользователя

Страница: 17 / 77

AXIS P1365 Mk II Network Camera
Set Up the Product
Set Up the Product
The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in
the top right-hand corner of the Live View page.
• Administrators have unrestricted access to all settings.
• Operators have restricted access to settings, see Users on page 54
See also the online help .
Basic Setup
Basic Setup provides shortcuts to the settings that should be made before using the Axis product:
1. Users. See page 54 .
2. TCP/IP. See page 57 .
3. Date & Time. See page 56 .
4. Video Stream. See page 20 .
5. Focus. See page 17 .
6. Audio Settings. See page 30 .
The Basic Setup menu can be disabled from System Options > Security > Users .
About focus
You can focus the Axis product under Video & Audio > Focus . The same settings can be found under Basic Setup > Focus .
For most applications, the adjustments on the Basic tab are sufficient. If required, additional adjustments can be made on the
Advanced tab.
Basic
Always open the iris before focusing and enable it when finished focusing. Opening the iris gives the smallest depth of field and
thus best conditions for correct focusing. The pixel counter is used to determine the number of pixels in an area of the image, for
example to ensure that the image size fulfills specific requirements. To position the pixel counter, click on the text and drag
the window to the desired position.
Advanced
Use the tools on this page to find the optimal focus position. Focus is measured in the part of the image covered by the Focus window .
How to adjust focus and zoom
If the camera is mounted so that you cannot look at the image and access the lens at the same time, use the Focus Assistant,
see
How to adjust focus with the Focus Assistant .
1. Open the product’s home page and go to Setup > Basic Setup > Focus .
2. Under the Basic tab, click Open iris . If the button is inactive the iris is already open.
3. If focus has been set before, click Reset to reset the back focus.
4. Loosen the zoom puller and the lock screw for the focus ring on the lens by turning them counter-clockwise. See Hardware
overview on page 7 .
5. Move the zoom puller and the focus ring to set zoom and focus and check the quality of the image in the image window.
17