Axis P1365-E Mk II, Руководство пользователя

Страница: 28 / 74

AXIS P1365-E Mk II Network Camera
Video and Audio
5. A new view area covers the whole image. Use the mouse to move and resize the view area.
6. Select Enable PTZ to enable digital PTZ for the view area.
7. Click Save to save the settings.
To modify a view area, select the view area in the list and modify the settings as required. Click Save .
To remove a view area, select the view area and click Remove .
Note
The PTZ functionality is useful during installation of the Axis product. Use a view area to crop out a specific part of the
full view.
About overlays
Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp,
or during product installation and configuration.
About overlay text
An overlay text can display the current date and time, or a text string. When using a text string, so-called modifiers can be used to
display information such as the current bit rate or the current frame rate.
It is also possible to display text when an action rule is triggered, see How to include overlay text in an action rule on page 28 .
How to include overlay text
1. Go to Video & Audio > Video Stream and select the Image tab.
2. To include date and time, select Include date and Include time .
3. To include a text string, select Include text and enter the text in the field. Modifiers can be used, see File Naming &
Date/Time Formats in the online help .
4. Select size, color, and placement of the text string.
5. Click Save .
To modify the date and time format, go to System Options > Date & Time . See Date & Time on page 53 .
How to include overlay text in an action rule
Note
To display overlay text in multiple view areas, overlay text must be enabled in each view area.
Example
To display the text “Motion detected” when motion is detected, enter
#D
in the Include text field and enter “Motion detected” in
the Text field when setting up the action rule.
1. Go to Video & Audio > Video Stream and select the Image tab.
2. Under Overlay Settings , select Include text .
3. Enter the modifier
#D
. When the rule is triggered,
#D
is replaced by the text specified in the action rule.
Additional text in this field will be displayed also when the action rule is not active.
4. Go to Events > Action Rules and create your action rule.
5. From the Actions list, select Overlay Text .
28