Section 3: Setup for NetWare
26
Axis NPS 550 User’s Manual
NetWare 4.xx:
1. Select
Print Servers
from the PCONSOLE Main Menu.
2. Select the NetWare Print Server to which you want to link your
NPS 550.
3. Select
Printers
.
4. Press <Insert> to add a remote printer to the Defined Printers list.
5. Type
AXIS<nnnnnn>!n
at the
Printer:
prompt.
(see notes below)
<
nnnnnn> are the last six digits of the NPS 550 serial number, and n is
the logical printer number 1–8.
6. Select
AXIS<nnnnnn>!n.
Important:
Always use printer numbers 1 and higher; the NPS 550
will not detect any remote printers with printer number 0.
7. Make a note of the NetWare print server name and the Printer
number; you will need it later during the configuration.
8. Select
Printer type:
, and change to
Other/Unknown
.
9. Select
Print Queues Assigned
, then press <Insert>
10.Press <Insert>, then select the queue you want to use from the Avail-
able Print Queues list.
Repeat this step if you want more than one
queue.
11.Press <F10> to save the changes, then press <Esc>.
12.Press <Esc> to get back to the Main Menu, then exit PCONSOLE.
Repeat this procedure for each file server and print server using the NPS
550.
Notes:
1. If the serial number of your NPS 550 is
00408C100086
, then the
default name is
AXIS100086
. The serial number is found on the label
at the back of the NPS 550.
2. You may change the default name using AXCFG, the Axis Configura-
tion Software. This must be done before running
PCONSOLE
.
3. You may define up to eight remote printers, each attached to its own
NPS 550 logical printer. Each remote printer must have a unique
name distinguished by the !n extension.
