Axis M5013-V страница 45 Скачать руководство пользователя

Страница: 45 / 55

AXIS M5013-V PTZ Dome Network Camera

System Options

Network Share

Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for
recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to

www.axis.com/products/cam_companion_software/supported.htm

Note

For NAS recommendations see

www.axis.com

To add a network share:

1. Go to

System Options > Storage

2. Click

Network Share

3. Enter the IP address, DNS or Bonjour name to the host server in the

Host

field.

4. Enter the name of the share in the

Share

field. Sub folders cannot be used.

5. If required, select

The share requires login

and enter the user name and password.

6. Click

Connect

To clear all recordings and data from the Axis product’s folder on the designated share, click

Clear

under

Storage Tools

To avoid filling the share, it is recommended to remove recordings continuously. Under

Recording Settings

, select

Remove recordings

older than

and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select

Lock

under

Recording Settings

Maintenance

The Axis product provides several maintenance functions. These are available under

System Options > Maintenance

Click

Restart

to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current

settings.

Note

A restart clears all entries in the Server Report.

Click

Restore

to reset most settings to the factory default values. The following settings are not affected:

•

the boot protocol (DHCP or static)

•

the static IP address

•

the default router

•

the subnet mask

•

the system time

•

the IEEE 802.1X settings

•

uploaded applications are kept but must be restarted

Click

Default

to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The

Axis product can also be reset to factory default using the control button, see

Reset to Factory Default Settings on page 47

To test the product’s PTZ mechanics, click

Test

under

PTZ Status

To identify the product or test the Status LED, click

Flash LED

under

Identify

and specify the duration in seconds, minutes or hours.

This can be useful for identifying the product among other products installed in the same location.

Содержание M5013-V
























































Результаты поиска

Содержание M5013-V

Отзывы:

Похожие инструкции для M5013-V

Бренды по названию

Популярные бренды

Axis M5013-V, Руководство пользователя

Результаты поиска

Содержание M5013-V

Отзывы:

Похожие инструкции для M5013-V

Бренды по названию

Популярные бренды