Axis M3114-R, Руководство пользователя

Страница: 5 / 49

AXIS M3114-R Network Camera
Hardware Overview
Network connector - D-coded M12 connector. Supports Power over Ethernet (PoE).
NOTICE NOTICE
NOTICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network
switch shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded.
See for regulatory requirements.
Control button - The control button is used for:
• Connecting to an AXIS Video Hosting System service. See page 35 . To connect, press and hold the button for
about 1 second until the Status LED flashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See page 36 . To connect, press and hold the button for
about 3 seconds.
• Resetting the product to factory default settings. See page 41 .
LED Indicators
LED Color Indication
Green
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Amber
Steady for connection to a 10 MBit/s network. Flashes for network activity.
Network
Unlit No network connection.
Green Steady green for normal operation.
Amber Steady during startup and when restoring settings.
Status
Red Slow flash for failed upgrade.
Green Normal operation. Power
Amber Flashes green/amber during firmware upgrade.
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go to
Setup > System Options > Ports
& Devices > LED . See the online help for more information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .
5