Axis M3007-P Скачать руководство пользователя страница 17

Страница: 17 / 63

AXIS M3007-P Network Camera

Video

Overview

This is an overview of the entire area under surveillence. Define the settings for this view from

Setup

Video

Video Stream

See

Set Up Video Streams on page 16

Panorama

This offers a 180 degree view. Define the settings for this view from

Setup

Video

Video Stream

Panorama

. See

Set Up

Video Streams on page 16

Double Panorama

In this view there are two 180 degree panoramic views. To define the settings for this view go to

Setup

Video

Video Stream

Double Pan...

. See

Set Up Video Streams on page 16

Quad View

A quad view is four views on a single screen where each image takes up a quarter of the display area. To define the settings for this
view go to

Setup

Video

Video Stream

Quad View

. See

Set Up Video Streams on page 16

Panorama Corner Left

This offers a 135° view that is suitable for corner installations to the left. Define the settings for this view from

Setup

Video

Video Stream

Panorama C...

. See

Set Up Video Streams on page 16

Panorama Corner Right

This offers a 135° view that is suitable for corner installations to the right. Define the settings for this view from

Setup

Video

Video Stream

Panorama C...

. See

Set Up Video Streams on page 16

Double Panorama Corner

In this view there are two 135° corner views. To define the settings for this view go to

Setup

Video

Video Stream

Double

Pan C...

. See

Set Up Video Streams on page 16

Image

The default image settings can be configured under

Video> Video Stream

. Select the

Image

tab.

The following settings are available:

•

Resolution

. Select the default resolution.

•

Compression

. The compression level affects the image quality, bandwidth and file size of saved images; the lower the

compression, the higher the image quality with higher bandwidth requirements and larger file sizes.

•

Mirror image

. If required, the image can be mirrored.

•

Rotate image

. If required, the image can be rotated.

•

Maximum frame rate

. To avoid bandwidth problems, the frame rate allowed to each viewer can be

Limited to

a fixed

amount. Alternatively, the frame rate can be set as

Unlimited

, which means the Axis product always delivers the highest

frame rate possible under the current conditions.

•

Overlay settings

. See

About overlay text on page 21

Click

Save

to apply the new settings.

Содержание M3007-P
































































Результаты поиска

Содержание M3007-P

Отзывы:

Похожие инструкции для M3007-P

Бренды по названию

Популярные бренды

Axis M3007-P, Руководство пользователя

Результаты поиска

Содержание M3007-P

Отзывы:

Похожие инструкции для M3007-P

Бренды по названию

Популярные бренды