USER MANUAL
13
_____________________________________________________________________________________________________________________
scale display,
Scale
→
Computer: without response,
Example:
⋅
in order to set low threshold 1000g in scale B1.5 (d=0.5g) the following order
should be sent:
S L 1 0 0 0 . 0 CR LF (53h 4Ch 31h 30h 30h 30h 2Eh 30h 0Dh 0Ah),
⋅
in order to set low threshold 100kg in scale B150 (d=50g) the following order
should be sent:
S L 1 0 0 . 0 0 CR LF (53h 4Ch 31h 30h 30h 2Eh 30h 30h 0Dh 0Ah),
setting high threshold value:
Computer
→
Scale: S H
D1...DN
CR LF (53h 48h
D1...DN
0Dh 0Ah),
D1...DN
– threshold value (see )
Scale
→
Computer: without response.
Note:
Network number different than zero (F..-rS
/ nr
function) changes scale working
mode: communication with a computer is possible after logging the scale in with
02h scale_number command. To log the scale out use 03h command.
Connecting cable WK-1
(scale – computer / 9-pin interface):
