Axis AXIS Q6042-E, Руководство по установке

Страница: 19 / 104

AXIS Q60 Series
Note
The installation and management software tools are available on the CD supplied with the
product and from the support pages on
www.axis.com/techsup
To reset the product to the factory default settings:
1. Press and hold the control button and the power button for about 15–30 seconds until
the status LED indicator flashes amber. See Hardware Overview, on page 10 .
2. Release the control button but continue to hold down the power button until the status
LED indicator turns green.
3. Release the power button and assemble the product.
4. The process is now complete. The product has been reset to the factory default settings.
If no DHCP server is available on the network, the default IP address is
192.168.0.90
5. Using the installation and management software tools, assign an IP address, set the
password and access the video stream.
It is also possible to reset parameters to factory default via the web interface. Go to
Setup
> System Options > Maintenance .
Further Information
The User Manual is available at www.axis.com
Visit www.axis.com/techsup to check if there is updated firmware available for your network
product. To see the currently installed firmware version, go to Setup > About .
Visit Axis learning center
www.axis.com/academy
for useful trainings, webinars, tutorials and
guides.
Scan the QR code to view a video on how to assemble the supplied RJ45 Push-pull Connector (IP66).
Warranty Information
For information about Axis’ product warranty and thereto related information, see
www.axis.com/warranty/
19
E
N
G
L
IS
H