Axis AXIS P1354-E Скачать руководство пользователя страница 59

Страница: 59 / 74

AXIS P1354–E Network Camera

System Options

Ports & Devices

I/O Ports

The Axis product provides one input port and one output port for connection of external devices. For information about how to
connect external devices, see

Connectors on page 71

The I/O ports are configured under

System Options > Ports & Devices > I/O Ports

. The ports can be given descriptive names and their

Normal states

can be configured as

Open circuit

Grounded circuit

COM Port

The Axis product has one RS-485/RS-422 serial port. The port supports the following modes:

•

Generic HTTP

allows the Axis product to receive data and send commands via HTTP.

•

Pan Tilt Zoom

is used to control a PTZ device. The PTZ device requires a driver. See

Install PTZ Driver

for more information.

Drivers can be downloaded from www.axis.com

•

Generic TCP/IP

allows the Axis product to receive data and send commands via TCP/IP.

Select the desired

Port Type

from the drop-down list. For more information, see the online help

Port Status

The list on the

System Options > Ports & Devices > Port Status

page shows the status of the product’s input and output ports.

Maintenance

The Axis product provides several maintenance functions. These are available under

System Options > Maintenance

Click

Restart

to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current

settings.

Note

A restart clears all entries in the Server Report.

Click

Restore

to reset most settings to the factory default values. The following settings are not affected:

•

the boot protocol (DHCP or static)

•

the static IP address

•

the default router

•

the subnet mask

•

the system time

•

the IEEE 802.1X settings

•

the focus position

•

uploaded applications are kept but must be restarted

Click

Default

to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The

Axis product can also be reset to factory default using the control button, see

Reset to Factory Default Settings on page 61

To identify the product or test the Status LED, click

Flash LED

under

Identify

and specify the duration in seconds, minutes or hours.

This can be useful for identifying the product among other products installed in the same location.

Содержание AXIS P1354-E











































































Результаты поиска

Содержание AXIS P1354-E

Отзывы:

Похожие инструкции для AXIS P1354-E

Бренды по названию

Популярные бренды

Axis AXIS P1354-E, Руководство пользователя

Результаты поиска

Содержание AXIS P1354-E

Отзывы:

Похожие инструкции для AXIS P1354-E

Бренды по названию

Популярные бренды