5
3.2 instance Properties
Once a camera has been placed into a Revit project, the instance properties listed below are available.
See also
Adjusting the field
of view visualization below.
Constraints
FOV Tilt
Controls the camera tilt or, for dome cameras,
the field of view
FOV Pan
Rotates the camera or, for dome cameras, the
field of view
FOV Distance to
object
Horizontal cut off distance for the field of
view visualization
FOV Upper limit
The field of view visualization is cut off at
this distance above the top of the camera
FOV Bottom limit
The field of view visualization is cut off at this
distance below the camera insertion point
Offset
Offset from floor level
Graphics
Target resolution
units
Unit for FOV Target Resolution setting. Pixels
per meter or foot.
FOV Target
resolution
Resolution in pixels per meter or foot for
resolution guide.
FOV Desired focal
length
The focal length chosen for the camera
FOV Actual focal
lenght
The focal length used – limited to the focal
length range supported by the camera
Text
Target area
Camera target area
Dimensions
Pendant status
message
For pendant mounts this message shows if
the pendant length is within limits
Pendant lenght
For pendant mounts, the pendant length
Identity data
Network port
Network Port Information
Comments
Comments
Visibility
Show field of view Turns the field of view visualization on or off
