Page 6
AXIS 212 PTZ/-V Installation Guide
Connect the cables
1. Optionally connect external input/output devices, e.g. alarm devices. See page 13 for informa-
tion on the terminal connector pins.
2. Optionally connect an active speaker and/or external microphone.
3. Connect the camera to the network using a shielded network cable.
4. Connect power using one of the methods listed below:
• PoE (Power over Ethernet) via the network cable. This will automatically be detected if
available via the network.
• Connect the supplied indoor power adapter to the power connector on the camera unit
.
5. Check that the network, status and power indicators (LEDs) light up green. See the table on
page 14 for LED descriptions.
Содержание AXIS 212 PTZ
Страница 16: ......
Страница 32: ......
Страница 76: ...Installation Guide Ver 2 10 AXIS 212 PTZ V Printed January 2010 Axis Communications AB 2008 2010 Part No 32731...