OPERATION
BASIC OPERATION
Turn on/off the unit & Mute function
Pressing
/M MUTE
button to turn on the unit. When the unit is on. Short press
this button for mute on/off. Press and hold this button to turn off the unit.
Sound and setting adjustment
Short press
SEL
button into the audio menu:
BASS->TRE->BAL->FAD->EQ(class/rock/pop/flat/off)->LOUD(on/off)
Press and hold
SEL
button for the setting menu:
CLOCK(HH)->CLOCK(MM)->CT(indep/sync)-CLOCK(24/12)->BEEP->P-
VOL->AREA(AUS/USA)->DX/LOC->STEREO/MONO
In each item rotating the VOL knob to set them.
Clock setting - manual
In the CLOCK(HH)/CLOCK(MM) item of the setting menu, rotate the
VOL
knob
to set the hour/minute.
CT(INDEP/SYNC):
CT INDEP:
The clock works independently.
CT SYNC:
The clock will be synchronized to the received RDS station’s time.
Note:
When the time is set manually (See above). The CT will revert back to
INDEP mode automatically.
CLOCK 24/12:
Setting the time to 24H or 12H format.
BEEP (ON/OFF):
Turn on/off the beep sound.
P-VOL (Preset VOL):
Setting the power on volume. If the volume at
shutdown is less than the P-VOL. The next time the unit is turned on, the
volume will be maintained at shutdown volume. If the volume at shutdown is
greater than the P-VOL. The next time you turn on the unit the volume will be
restored to the P-VOL value.
AREA (AUS/USA):
To choose Australia frequency.
DX/LOC (Distance/Local):
LOC:
Receive the strong signal station only in seek station.
DX:
Receive strong and weak signal station in seek the station.
STEREO/MONO:
STEREO:
Receive FM stereo signal.
MONO:
Change FM stereo to mono. It can reduce the noise when the signal is
weak.