Axis A9188, Руководство по установке

Страница: 14 / 30

AXIS A9188 Network I/O Relay Module
Green Steady green for normal operation.
Amber Steady during startup and when restoring settings.
Status
Red Slow flash for failed upgrade.
Green Normal operation. Power
Amber
Flashes green/amber during firmware upgrade.
Green Relay coil is energized Relay
Unlit Relay coil is unenergized
Green
I/O is grounded
Unlit
I/O is floating
I/O
Blinking
Tamper error (wire cut or open)
Red Overcurrent
RS485 (not
used)
Unlit Normal state
Red Overcurrent
I/O voltage
Unlit Normal state
Install the hardware
System Considerations
The Axis product shall be installed within a secured area.
The Axis product, whether it is installed as a single elevator controller or in a system of controllers,
shall not limit or weaken the intended use of the devices connected to it.
The Axis product should be installed with a DIN rail on a wall (preferred) or a ceiling, with or
without a junction box.
Note
• The Axis product is considered standalone, and does not require constant connection to a
computer for proper operation. The use of a connected computer is for local programming,
downloading, and supplemental monitoring purposes only.
• Elevator recall for fire has not been evaluated by UL.
Wall and Ceiling Mount
1. If using a junction box, install the junction box before installing the IO Relay Module.
14