Axis 8122 DC 30W Midspan, Руководство по установке, Страница: 7 / 50

AXIS T8122 DC 30W Midspan Page 7
EN
GL
IS
H
Power switch -
Before the unit is powered on, the power switch has to be
set in the correct position.
• Position 1 (30W): Use this setting if an 802.3at PoE camera is con-
nected to the midspan and the power source can deliver a minimum
of 40W.
• Use this setting if an 802.3af PoE camera is connected to the midspan
and the power source can deliver a minimum of 20W.
CAUTION!
The GND pin on the 45-57V DC contact is an isolated GND; do NOT
connect it to the GND-shield on the RJ45.
Indicators
LED Color Indication
Port Unlit No camera connected
Steady green Camera connected, normal behavior 802.3af
(15W)
Steady yellow Camera connected, normal behavior 802.3at
(30W)
Green/yellow 1 Hz
blinking Over current or short circuit condition on the
port
Green/yellow 4 Hz
blinking PSE input voltage out of range or other
internal fault
DC
input
Steady green DC power connected