AdVAnced SecURIty
And netwoRk mAnAgement
To facilitate the centralized management of Axis network
video devices, the Axis video server rack solution is supported
by AXIS Camera Management, which can locate and display
connection status, set IP addresses, configure single or
multiple units, and also manage firmware upgrades and user
access rights. The Axis video server rack solution offers a
comprehensive set of network security features, such as multi-
level password protection, IP address filtering and HTTPS
encryption.
The Axis video server rack solution supports Quality of Service
(QoS), which enables e.g. the reservation of network capacity
and the prioritization of mission-critical surveillance traffic
on a QoS-aware network. The rack solution also includes
support for Internet Protocol version 6 (IPv6), which amongst
many improvements allows the use of a far greater number
of IP addresses than currently available in IPv4. The support
for 802.1X network access control is used to authenticate
hosts wishing to access devices or resources on a protected
network.
dImenSIonS
AXIS BlAde VIdeo SeRVeRS
A wide range of blade video servers is available. Further information can be found in the datasheet for each video server.
Product Selection guide
Product
Number of
channels
Video
compression
Frames per second per channel (fps)
(NTSC/PAL)
Video motion
detection
Alarm
inputs/outputs
PTZ support
HTTPS
240Q Blade
4
Motion JPEG
6/5 fps (all resolutions) using all 4 channels
Yes
4 / 4
Yes
Yes
241Q Blade
4
Motion JPEG
30/25 fps (CIF) using all 4 channels
30/25 fps (4CIF) using 1 channel
Yes
4 / 4
Yes
Yes
MPEG-4
20/17 fps (CIF) using all 4 channels
30/25 fps (2CIF) using 1 channel
241S Blade
1
Motion JPEG
30/25 fps (4CIF)
Yes
4 / 4
Yes
Yes
MPEG-4
30/25 fps (2CIF)
243Q Blade
4
Motion JPEG
30/25 fps (4CIF) using all 4 channels
Yes
4 / 4
Yes
Yes
MPEG-4
30/25 fps (4CIF) using all 4 channels
