Axis 26123R1 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 77

Axis 26123R1 Скачать руководство пользователя страница 10

10

AXIS 282/282A - Installation

Installation

Installation Methods

The AXIS 282/282A is designed for installation on an Ethernet network. This involves

assigning it an IP address, either manually or via an automated network service (DHCP).

Select one of the following procedures depending on your network:

• In Windows, use AXIS IP Utility to discover a dynamic IP address, or to set the IP address

manually.

• If your network uses a DHCP server, view its administration pages to discover which IP

address has been assigned to your AXIS 282/282A.

• If your network uses a DHCP server and your computer is running UPnP™, the AXIS

282/282A will automatically be detected and displayed on your screen. See page 11.

• Assign an IP address manually using the ARP/Ping method, as described on page 12.
• If your network has an Internet connection (with no HTTP proxy) and uses a DHCP server

to assign IP addresses, use the One-Click installation procedure. See page 14.

Notes:

• The AXIS 282/282A has a default IP address:

192.168.0.90

• DHCP is enabled by default in the AXIS 282/282A
• UPnP™ is enabled by default in the AXIS 282/282A

AXIS IP Utility

AXIS IP Utility is a free Windows

application that discovers and displays

Axis devices on your network. The

application can also be used to

manually set a static IP address.

Download AXIS IP Utility from the

support pages at:

www.axis.com/techsup/software

Automatic discovery

1. Check that the network and power cables are connected to the AXIS 282/282A.
2. Start AXIS IP Utility. When the AXIS 282/282A appears in the window, double-click it

to open the home page.

Set the IP address manually

If the AXIS 282/282A does not appear in the window, click the

Refresh

button to try

again. If it still does not appear, set the IP address manually.

1. Acquire an unused IP address. AXIS IP Utility detects the subnet your computer is

«
...
8
9
10
11
12
...
»

Содержание 26123R1














































































Отзывы:

Нет отзывов