- -
Installing Axis 231D/232D Camera
1. Install the camera onto the quick release bracket. Loosen one of
the screws on the bottom of the camera, see diagram below.
2. Place quick release bracket onto the bottom of the camera,
making sure that the (3) locking buttons
line up with the keyhole slots
in the Q/R bracket.
Also make sure
the screw that
you loosened
up in the
previous
step lines
up with
the slot
located
next
to the
captive
insert.
3. Turn the camera counter
clockwise.
4. When the locking buttons hit the end of the keyhole slots.
Tighten the locking screw. Then put the camera assembly aside.
6. Now attach (4) ½” spacers (located in the packet that came with
the housing) to the base bracket.
5. Remove the (4) ½” spacers that are attached to the base bracket
inside the housing.
Locking screw
½" spacers
Base Bracket
½" spacers
Base Bracket
Loosen screw
Locking buttons
Locking screw
Captive insert
Keyhole slots
½"
