manualshive.com logo in svg

Axis 2400/01, Руководство администратора, Страница: 34 / 87

Поделиться
Скачать
Axis 2400/01 Скачать руководство пользователя страница 34

 

The AXIS 2191 Audio Module

 

AXIS 2400/2401 Admin Manual

 

34 

Configuring the Audio Module 

The video server’s administration pages provide all the tools required for successfully configuring 
the AXIS 2191. From the server’s home page, click on the link to 

Administration Tools

 and then 

follow this procedure:

1. In the Admin tools, click on the icon for COM2. Select the AXIS 2191 Audio Module as 

the 

Purpose

 for this port. Click 

Save

. 

Note:

If the AXIS 2191 is not available for selection, the video server does not have the correct firm-
ware for running this device and must be upgraded. See 

Updating the Firmware, 

on page 44.

2. You should now see the icon for the 

AXIS 2191 Audio Module under the icon for COM2. 

Click this icon to open the 

Audio Settings

 page.

3. Select the 

Audio Mode

. This can be:

• Full-Duplex (Talk and Listen Simultaneously)
• Half-Duplex (Talk and Listen)
• Simplex - Talk 
• Simplex - Listen

This selection will depend on your 
application. See page 35 for more 
information.

4. Enter the maximum number of clients that 

will be able to access the application at 
any one time. Use this setting to limit 
access if you only have limited bandwidth 
available. 

5. If you are using Half-Duplex mode, the 

Send

 option can be used to send audio 

from the client currently transmitting to all 
the other clients, and not just to the server 
end. Set to 

Yes

 to enable the function. 

6. When using Half-Duplex, the 

Push-To-Talk

 button will be visible. Select 

the mode to use for this button. Selecting 

Toggle

 means that when the button is 

pushed it will remain so until pushed 
again. 

Instant

 means that the button will 

remain active (pushed) until released.

7. Adjust the 

Volume Out

 control until a satisfactory speaker level is heard. The 

Level Out LED

 

can be used to check that there is audio being received. Note that both the control and the LED 
are on the audio module itself.

The configuration page for the AXIS 2191.

Содержание 2400/01
























































































Отзывы:

Нет отзывов