4
Rev 1.0
axiomware.com
The front panel of Netrunr Edge has three user-programmable green LEDs. The LEDs are connected to
following pins of AMD FCH south bridge as listed in Table 1.
LED
PIN ID
Default Function
LED1
G57
Power/Heartbeat
LED2
G58
WAN activity
LED3
G59
SSD hard drive activity
Table 1: LED connections
Software to control is provided as Linux kernel module through Axiomware software repository on Github
(https://github.com/axiomware).
3.2 Back Panel
The back panel of the NES has ports listed in Table 2. Default functionality (as WAN or LAN) of ethernet
ports can be modified using software. Functionality of ANT1 and ANT2 is dependent of installed options.
PORT
Default Function
Connector/Type
ANT1
Dual-band Wi-Fi Antenna
RP-SMA
RS232C
Serial port (DTE)
DB9
LAN1
LAN
–
Gigabit ethernet
RJ45
LAN2
LAN
–
Gigabit ethernet
RJ45
WAN
WAN
–
Gigabit ethernet
RJ45
USB
Dual USB 3.0 Host ports
USB host
12V
DC power input
Barrel (center power)
ANT2
2.4GHz Bluetooth Antenna
RP-SMA
Table 2: Back panel
Figure 2: Back panel
Power is supplied by a barrel connector (5.5mm OD, 2.5 mm id), with center pin at 12V. Nominal power
consumption of Netrunr Edge server is TBD.
