94174500000E
©Copyright 2018 Axiomtek Co., Ltd.
Version A1 Aug. 2018
Printed in Taiwan
2
Step 3 Turn the SATA drive upside down to install storage 2 and insert 8 screws to secure the SATA
drive.
Please notice the direction of connector for HDD.
Step 4 Slide the secured SATA drive back to complete the installation.
Installation of SO-DIMM Memory
Step 1 Turn off the system and unplug the power adaptor.
Step 2 Loosen all screws of the heatsink and remove the heatsink from the system.
Step 3 Located the dual SO-DIMM sockets on main board.
Note: Please install the CPU first and use thermal grease evenly on the CPU top face.
94174500000E
©
Copyright 2018 Axiomtek Co., Ltd.
Version A1 Aug. 2018
Printed in Taiwan
3
Step 4 Locate the memory module, insert a gold-colored contact into the socket and push the module
two end latches till locked.
Step 5 Make sure all thermal pads are in the correct position.
Step 6 Put the heatsink back to the system, and fasten screws tight close the chassis.
Note: Please refer to the user’s manual to get more detail information.
Installation of mPCIe card
Step 1 Turn off the system and turn it upside down as below shown. Extract the SATA drive as shown.
