AXIOMTEK tBOX320-852-FL Series, Руководство пользователя

Страница: 70 / 102

tBOX320-852-FL Series U
ser’s Manual
AMI BIOS Setup Utility
62

IDE Configuration
Use this screen to select options for the IDE Configuration and change
the value of the selected option. Available options of the selected item
appear on the right side of the screen. For items marked with
“

”,
please press <Enter> for more options.

Primary/Secondary/Third IDE Master/Slave
Select one of the hard disk drives to configure IDE devices
installed in the system by pressing <Enter> for more options.

Hard Disk Write Protect
Set this option to protect the hard disk drive from being
overwritten. The default setting is Disabled.

IDE Detect Time Out (Sec)
Set this option to stop the AMIBIOS from searching for IDE
devices within the specified number of seconds. Basically,
this allows you to fine-tune the settings to allow for faster
boot times. Adjust this setting until a suitable timing that can
detect all IDE disk drives attached is found.

JMicron 36x ATA Controller
Set this option to enable or disable CF card controller