AXIOMTEK SDM300S, Руководство пользователя

Страница: 15 / 50

Intel
®
Smart Display Module (SDM-S) SDM300S
Module and Pin Assignments 9
2.3 Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. Below illustration
shows how to set up jumper.
Properly configure jumper settings on the SDM300S to meet your application purpose. Below
you can find a summary table of jumper and onboard default settings.
Note
Once the default jumper setting needs to be changed, please do it under power-off
condition.
Jumper Description Setting
JP1
Auto Power On
Default: Enable
1-2 Close
2.3.1 Auto Power On (JP1)
If JP1 is enabled for power input, the system will be automatically power on without
pressing soft power button. If JP1 is disabled for power input, it is necessary to manually
press soft power button to power on the system.
Function Setting
Enable auto power on (Default) 1-2 close
Disable auto power on 2-3 close