AXIOMTEK SBC86808 Series, Руководство пользователя

Страница: 59 / 78

SBC86808 Pentium
®
M All-in-One Mini ITX Board User’s Manual
Award BIOS Utility
51
z
ACPI Function
This item allows you to enable/disable the Advanced
Configuration and Power Management (ACPI). The options
available are Enabled, Disabled.
z
Power Management
This option allows you to select the type (or degree) of power
saving for Doze, Standby, and Suspend modes. The table below
describes each power management mode:
Max
Saving
Maximum power savings. Only Available for SL CPUs.
Inactivity period is 1 minute in each mode.
User Define
Sets each mode individually. Select time-out periods in
the PM Timers section, following.
Min Saving
Minimum power savings. Inactivity period is 1 hour in
each mode (except the hard drive).
Disabled Default value
z
PM Control by APM
If Advanced Power Management (APM) is installed on your
system, selecting Yes gives better power savings. The default
value is
“
Yes
”
.
No System BIOS will ignore APM when power managing the
system
Yes
System BIOS will wait for APM’s prompt before it enters any
PM mode (i.e., DOZE, STANDBY or SUSPEND).
Note: If APM is installed or if there is a task running, even
when the timer has timed out, the APM will not prompt
the BIOS to put the system into any power saving
mode
!
NOTE:
If APM is not installed, this option has no effect.