AXIOMTEK SBC8232, Руководство пользователя

Страница: 17 / 50

SBC8232 386SX ISA Half-size CPU Card Family User’s Manual
AMI BIOS Setup
11
C h a p t e r 4
AMI BIOS Setup
4.1 System Initialization and Setup
Verification
After turning the power on, the system will run routine testing
and initialize board hardware. If there is any error during the
tests, you will either hear a few short beeps or see an error
message on the screen. The errors can either be fatal or non-
fatal. The system usually continues the boot up sequence with
not-fatal errors. Non-fatal error messages usually appear on
the screen along with the following instructions:
press <F1> to RESUME
Write down the message and press the F1 key to continue the
bootup sequence.
The current system s configuration is different from the values
stored in the board s CMOS memory. If they don t match, the
program will produce error messages. You ll have to run the
BIOS setup program again to set the correct configurations into
memory.
You will need to change the CMOS settings in following three
situations:
"
during initial boot up of system,
" after adding and/or removing hardware attached to your
system,
" when CMOS memory loses information on the saved
configuration.
The SBC8232V s CMOS memory has an integrated lithium
battery backup. The battery backup can last for ten years.
Once it runs down, you will need to replace the RTC parts.
Contact your system administrators for assistance.