SBC81870 Intel
®
Pentium
®
M w/ DDR/VGA/Dual LAN
Hardware Configuration
12
2.3
How To Set The Jumpers
You can configure your board by setting jumpers. Jumper is
consists of two or three metal pins with a plastic base mounted
on the card, and by using a small plastic
"
cap
"
, Also known as
the jumper cap (with a metal contact inside), you are able to
connect the pins. So you can set-up your hardware
configuration by
"
open
"
or
"
close
"
pins.
The jumper can be combined into sets that called jumper
blocks. When the jumpers are all in the block, you have to put
them together to set up the hardware configuration. The figure
below shows how this looks like.
JUMPERS AND CAPS
If a jumper has three pins (for examples, labelled PIN1, PIN2,
and PIN3), You can connect PIN1 & PIN2 to create one setting
and shorting. You can either connect PIN2 & PIN3 to create
another setting. The same jumper diagrams are applied all
through this manual. The figure below shows what the manual
diagrams look and what they represent.
Содержание SBC81870 Series
Страница 6: ......
Страница 12: ...SBC81870 Intel Pentium M w DDR VGA Dual LAN 6 Monitor Voltage CPU Temperature and Cooling Fan ...
Страница 24: ...SBC81870 Intel Pentium M w DDR VGA Dual LAN Hardware Configuration 18 Manufactory default AT Keyboard ...
Страница 120: ...SBC81870 Intel Pentium M w DDR VGA Dual LAN Trouble Shooting 114 Appendix D PCI Routing Table ...