AXIOMTEK Qseven Q7B300, Руководство пользователя

Страница: 15 / 35

Q7B300 Qseven Module Development Board
Board and Pin Assignments 9
2.4.1 PWR_OK Signal Source Selection (JP1)
Use JP1 to select PWR_OK signal source.
2.4.2 LPC/GPIO Selection (JP2)
Use JP2 to select LPC or GPIO.
2.4.3 Enable/Disable COM function (JP3)
Use JP3 to enable or disable COM port function from carrier board NTC5104.
2.4.4 I2S/HDA Selection (JP4)
Use JP4 to select I2S or Intel HDA.
2.4.5 Route USB 2.0 Port 1 Signals (JP5)
Use JP5 to route USB 2.0 port 1 to standard USB A connector or to micro AB.
Function Setting
Pull up to signal PWR_OK 1-2 close
From ATX power (Default) 3-4 close
From carrier DC/DC circuit 5-6 close
Function Setting
GPIO 1-2 close
LPC (Default) 2-3 close
Function Setting
Disable (Default) 1-2 close
Enable 2-3 close
Function Setting
I2S 1-2 close
HDA (Default) 2-3 close
Function Setting
Route to micro AB 1-2 close
Route to standard USB A connector (Default) 2-3 close