AXIOMTEK PICO316, Руководство пользователя

Страница: 25 / 60

PICO316/317 Pico-ITX Board
Board and Pin Assignments 19
2.5.8 USB 2.0 Wafer Connector (CN10)
This 2x5-pin (pitch=2mm) wafer connector is compliant with Hirose DF11-10DP-2DSA
and a Universal Serial Bus (USB) connector for installing versatile USB 2.0 compliant
interface peripherals.
2.5.9 Ethernet Port (CN11)
The board has one RJ-45 connector. Ethernet connection can be established by
plugging one end of the Ethernet cable into this connector and the other end (phone jack)
to a 1000/100/10-Base-T hub.
L1 L2 L3 L4 L5 L6 L7 L8
A B
A B
2.5.10 Audio Jack (CN12)
This is audio jack for audio out with HD audio support.
Install audio driver, and then attach audio device to
CN12.
Pin Signal Pin Signal
1
USB VCC
(+5V_SBY)
2
USB VCC
(+5V_SBY)
3 USB #7_D- 4 USB #5_D-
5 USB #7_D+ 6 USB #5_D+
7 GND 8 GND
9 GND 10 GND
Pin
1000
Base-T 100/10
Base-T
Description
L1 BI_DA+ TX+ Bidirectional or Transmit Data+
L2 BI_DA- TX- Bidirectional or Transmit Data-
L3 BI_DB+ RX+ Bidirectional or Receive Data+
L4 BI_DC+ N.C. Bidirectional or Not Connected
L5 BI_DC- N.C. Bidirectional or Not Connected
L6 BI_DB- RX- Bidirectional or Receive Data-
L7 BI_DD+ N.C. Bidirectional or Not Connected
L8 BI_DD- N.C. Bidirectional or Not Connected
A
Active Link LED (Yellow)
Off: No link
Blinking: Data activity detected
B
Speed LED
1000: Orange
100/10: OFF/Green