2
9418H313000E
©
Copyright 2017 Axiomtek Co., Ltd.
Version A1 May 2017
Printed in Taiwan
SCN1
SCN3
SCN2
SSDIMM1
Bottom View
Note: Please refer to the PICO313 product information DVD for the complete
user’s manual, drivers and utilities. User’s manual and related
documents are in Acrobat PDF format.
Jumper Settings
Before applying power to the PICO313, please make sure all of the
jumpers are in factory default position.
Jumper
Description
Setting
JP2
LVDS +3.3V/+5V/+12V Voltage Selection
Default: +3.3V
1-2 Close
JP3
Restore BIOS Optimal Defaults
Default: Normal Operation
1-2 Close
JP4
Auto Power On
Default: Enable
2-3 Close
9418H313000E
3
©
Copyright 2017 Axiomtek Co., Ltd.
Version A1 May 2017
Printed in Taiwan
Connectors
Connector
Description
CN1
CN2
CN4
CN5
CN6
CN7
CN8
CN9
CN10
CN11
CN12
BAT1
LAN1
SATA1
SCN1
SCN2
SCN3
SSDIMM1
Board to Board Connector 1 (Low Speed Signal)
Board to Board Connector 2 (High Speed Signal)
USB 2.0 Wafer Connector
SATA Power Connector
SMBus Connector
Front Panel Connector
Digital I/O Connector
I2C Connector
LVDS Connector
Power Connector
Inverter Connector
CMOS Battery Connector
Ethernet Connector
SATA Connector
Full-size PCI-Express Mini Card
or
mSATA Connector
SIM Card Socket
Half-size PCI-Express Mini Card Connector
DDR3L SO-DIMM Connector
Quick Start
CN5 on AX93A07
Note: Please refer to AX93A07 quick installation guide for I/O board related
information.
The basic procedures required to power on PICO313:
(1). Require at least 60W/12V DC power adapter. Make sure that all
necessary peripheral devices are plugged properly.
(2). Check all jumper settings and make sure they are at default settings;
especially JP4 (2-3 close).
(3). To ensure normal functioning, DDR3L memory module must be
installed into SSDIMM1 until fully seated.
