AXIOMTEK PANEL1127-671, Руководство пользователя

Страница: 19 / 34

PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual
System Installation
11
C h a p t e r 3
System Installation
This chapter describes the installation and the cable connection to the
system connectors. See system board User’s Manual that came with
your PANEL PC packaging for more details. Sections in this chapter
includes
„
CPU
„
DRAM
„
HDD
„
3 x Serial
Ports
„
Parallel Port
„
VGA
„
Ethernet
„
Digital I/O
„
Keyboard
„
PS/2 Mouse
„
Expansion
Slot
„
System O/S
and
Software
Installation
The PANEL1127-671 has a Pentium III little board with a free ISA and
PCI slots inside the riser card assembly. It already builds in a Pentium
III CPU, relevant DRAM and a 3.5” HDD.These are all standard and
the system is ready to play. System performance can be increased by
upgrading to a higher performance CPU, higher capacity DRAM
modules and hard disk drive. The user can use the I/O ports located
at the backside of the chassis to connect external peripheral devices,
such as a monitor, serial devices, parallel printer…etc.
NOTE:
Make sure the power cord is disconnected before any
installation. To install any internal device such as CPU,
DRAM and HDD, take out the rear chassis cover first.