2 9412M883060E
©
Copyright 2016 Axiomtek Co., Ltd.
Version A2 Nov 2016
Printed in Taiwan
Installing the Memory Module
Step 1
Loosen the screws on the real of chassis as illustrated.
Step 2
After losing the screws, extract the real of chassis out of the
module.
Step 3 Place the memory module into the socket and press it
firmly. The socket latches are levered upwards and
clipped on to the edges of the DIMM.
Step 4 The DRAM installation is finished, please fasten all of
screws with bracket, and M3x4 screws are included.
9412M883060E 3
©
Copyright 2016 Axiomtek Co., Ltd.
Version A1 Nov 2016
Printed in Taiwan
Installing the HDD/ SSD
The OPS883-H series provides one 2.5” SATA HDD tray to install
2.5” HDD. When please refer to the following instructions and
illustration
Step 1 Loosen the screws per illustrated.
Step 2
Please refer to the below photo to connect the target
2.5” HDD/SSD with HDD
’
s bracket.
Step 3
Then plug HDD drive in to HDD connector.
Step 4
Finally, fasten two screws on HDD cover firmly
.
