AXIOMTEK OPS500-520-H Series, Руководство пользователя

Страница: 16 / 58

OPS500-520-H
User’s Manual
Introduction 10
Location of JAE TX25A Plug Connector
Please refer to the following drawing for location of the JAE TX25A plug connector. Pin 1 of
the connector is located at 114.8 mm from the edge of the module, and 106.9 mm from the
inner side of the front panel. For mating tolerance of TX25A plug connector and TX24A
receptacle connector, please refer to the JAE improved connector specification
Vent Holes at the Pluggable Module Back Panel
On the OPS500-520-H Series module, it is recommended by Intel that some vent holes be
opened at the back so that hot air can escape more easily from the module that the FAR in
on both sides of the module back panel should be greater than 0.25.