2 9418K830000E
©
Copyright 2012 Axiomtek Co., Ltd.
Version A1 December 2012
Printed in Taiwan
Jumper Settings
Before applying power to the NANO830/831, please make sure all of the
jumpers are in factory default position.
Jumper
Description
Setting
JP1
LVDS Voltage Selection
Default: +3.3V level
1-2 Close
JP2
COM1 RS-232/422/485 Mode Setting
Default: RS-232
3-5, 4-6 Close
JP3
3-5, 4-6 Close
JP4 1-2
Close
JP5
COM2 Data/Power Selection
(NANO830 only)
Default: RS-232 Data
CN2 Pin 1: DCD
3-5 Close
CN2 Pin 8: RI
4-6 Close
COM2 Data/Power Selection
(NANO831 only)
Default: RS-232 Data
CN19 Pin 1: DCD
3-5 Close
CN19 Pin 9: RI
4-6 Close
JP6
COM1 Data/Power Selection
Default: RS-232 Data
CN3 Pin 1: DCD
3-5 Close
CN3 Pin 8: RI
4-6 Close
JP8
LVDS Brightness Control Mode Setting
Default: PWM Mode
1-2 Close
JP9
Restore BIOS Optimal Defaults
Default: Normal Operation
1-2 Close
JP10
Auto Power On
Default: Disable
Close
Board Layout
NANO830
Side View
NANO831
Side View
9418K830000E 3
©
Copyright 2012 Axiomtek Co., Ltd.
Version A1 December 2012
Printed in Taiwan
Top View
NANO830 – Side View
NANO831 – Side View
