AXIOMTEK NA-814, Руководство по установке оборудования, Страница: 57 / 58

NA-814 Hardware Installation Guide
Warning
51
Appendix A
Warning
z
This is a class A Product. In a domestic Environment this
Product may cause radio interference in which case the user
may be required to take adequate measures.
z
It will be danger if battery is incorrectly replaced. Replacing
only with the same or equivalent type is highly recommended by
the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
Warning for Hard Disk Drive Selection:
TUV approved Hard Disk Drive is preferred for TUV compliance Hard
Disk drive-Optional, (NWGQ2), generic, Input Voltage rated 5V
dc/1.0A, 12V dc/1.8A maximum. Minimum clearance from
uninsulated live parts 4.0 mm.
“The equipment is to be installed in an environment with
maximum ambient temperature must not exceed 40
°
C.”
“The openings on the enclosure are for air convection hence
protected the equipment from overheating.
DO NOT COVER THE OPENINGS.”
“Lay this equipment on a reliable surface when install. A drop
or fall could cause injury.”
“The equipment shall be installed according to specification as