AXIOMTEK NA-401, Руководство по установке оборудования

Страница: 40 / 68

NA-401 Hardware Installation Guide
Award BIOS Utility 34
information should be provided in the documentation from
your hard disk vendor or the system manufacturer.
If the controller of HDD interface is ESDI, select
“
Type 1
”
.
If the controller of HDD interface is SCSI, select
“
None
”
.
If the controller of HDD interface is CD-ROM, select
“
None
”
.
CYLS.
number of cylinders
LANDZONE
landing zone
HEADS number of heads SECTORS number of sectors
PRECOMP
write precom
MODE
HDD access mode
If there is no hard disk drive installed, select NONE and
press <Enter>.
Halt On
This field determines whether the system will halt if an
error is detected during power up.
No errors
The system boot will halt on any error
detected. (default)
All errors
Whenever the BIOS detect a non-fatal
error, the system will stop and you will
be prompted.
All, But Keyboard
The system boot will not stop for a
keyboard error; it will stop for all other
errors.
All, But Diskette
The system boot will not stop for a
disk error; it will stop for all other
errors.
All, But Disk/Key
The system boot will not stop for a
keyboard or disk error; it will stop for
all other errors.