AXIOMTEK NA-330 Series, Руководство пользователя

Страница: 22 / 60

NA-330 Series Network Appliance User’s Manual
Hardware Description
16
2.4 Jumper Settings
This section provides the information about jumpers and connectors of
NA-330 Series . Proper jumper settings configure the main board in this
appliance to meet your application purpose. We are herewith listing a
summary table of all jumpers and default settings for onboard devices,
respectively.
Jumper Function Description Jumper Setting
GND
(Default)
Short 1-2
JP2
Pin7 of SATA3 Con
selection for SATA
DOM
VCC ( +5V ) Short 2-3
Normal (Default) Short 1-2
JP3 Clear CMOS Setting :
Clear CMOS Short 2-3
3.3V for CF (Default) Short 1-2
JP4 CF voltage select
5V for CF Short 2-3
Auto Power On Enable(Default) Open
JP8 Auto Power On
Auto Power On Disable
Short
LAN3 & LAN4 Always Bypass
Disable
Short 1-2
LAN3 & LAN4 Always Bypass
Short 2-3
JP16
Hardware Control
LAN Bypass Group 1
(LAN3
、
LAN4)
Trigger By JP18/ JP17 or
WDT (Default)
Open
LAN3 & LAN4 Bypass Group 1
GPO High Level (By Pass
Disable)(Default)
Open/Short
JP17/JP18
LAN Bypass Group
1
LAN3 & LAN4 Bypass Group1
GPO Low Level (By Pass Enable)
Short/Open
LAN5 & LAN6 Always Bypass
Disable
Short 1-2
LAN5 & LAN6 Always Bypass Short 2-3
JP15
Hardware Control
LAN Bypass Group 2
(LAN5
、
LAN6)
Trigger By JP13/ JP14 or
WDT (Default)
Open