AXIOMTEK MANO861, Руководство пользователя, Страница: 31 / 64

MANO861 Mini ITX Board
Hardware Installation 25
3.3.4 Removing a SO-DIMM
1. Simultaneously press the retaining clips downward to unlock the SO-DIMM .
2. Remove the SO-DIMM from the socket.
Note
Support the SO-DIMM lightly with your fingers when pressing the
retaining clips. The SO-DIMM might get damaged when it flips out with
extra force.
3.4 Expansion Card
In the future, you may need to install expansion cards. The following sub-sections describe the
slots and the expansion cards that they support.
Warning
Make sure to unplug the power cord before adding or removing expansion cards.
Failure to do so may cause you physical injury and damage motherboard
components.
3.4.1 Installing an Expansion Card
1. Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card
.
2. Remove the system unit cover (if your motherboard is already installed in a
chassis).
3. Remove the bracket opposite the slot that you intend to use. Keep the screw for
later use.
4. Align the card connector with the slot and press firmly until the card is completely
seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
6. Replace the system cover.
Unlocked retaining clip