AXIOMTEK MANO840, Руководство пользователя

Страница: 18 / 64

MANO840 Mini ITX Motherboard
12 Board and Pin Assignments
Hard Disk Drive Activity LED (Pin 1-3 HDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to
this connector. The IDE LED lights up or flashes when data is read from or written to the
HDD.
2.4.5 ATX Power Connector (ATX12V)
The connector is for ATX power supply plugs. The power supply plugs are designed to fit
these connectors in only one orientation. Find the proper orientation and push down
firmly until the connectors completely fit.
Note

Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.

Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
2.4.6 Audio Connector (F_AUDIO)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC ‘97 (optional) audio standard. Connect one end of the front
panel audio I/O module cable to this connector.
1
Important
For motherboards with the optional HD Audio feature, we recommend that
you connect a high-definition front panel audio module to this connector to
avail of the motherboard’s high-definition audio capability.
Pin Signal Pin Signal
1 GND 3 +12V
2 GND 4 +12V
Pin Signal Pin Signal
1 MIC2_L 2 AUGND
3 MIC2_R 4 FP_AUD_DETECT
5 HPOUT-R 6 MIC2-JD
7 AUGND 8 NC
9 HPOUT-L 10 HPOUT-JD
1 2