AXIOMTEK MANO520 Series, Руководство пользователя

Страница: 14 / 59

MANO520 Mini ITX Motherboard
8 Board and Pin Assignments
Jumper Description Setting
JP1
Clear CMOS
Default: Normal Operation
1-2 Close
JP3
AT/ATX Power Mode Select
Default: ATX Mode
1-2 Close
JP4
COM1 RS-232/422/485 Mode Select
Default: RS-232
1-2 Close
JP6 3-5, 4-6 Close
JP7 3-5, 4-6 Close
JP5
COM1 Data/Power Select
Default: RS-232 Data
CN21 Pin 1: DCD# 3-5 Close
CN21 Pin 9: RI# 4-6 Close
JP8
LVDS Backlight PWM/DC Mode Select
Default: PWM
1-2 Close
JP9
LVDS VDD Select
Default: +3.3V
1-2 Close
JP10
Case Open Select
Default: Close
1-2 Close
2.3.1 Clear CMOS (JP1)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing the
CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS,
which includes system setup information such as system passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2. Remove the onboard battery.
3. Move the jumper clip from pins 1-2 (default) to pins 2-3. Keep the clip on pins 2-3
for about 5~10 seconds, then move the clip back to pins 1-2.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
2.3.2 AT/ATX Power Mode Select (JP3)
This 3-pin (pitch=2.0mm) jumper allows you to select AT or ATX power mode.
Function Setting
Normal operation (Default) 1-2 close
Clear CMOS 2-3 close
Function Setting
ATX mode (Default) 1-2 close
AT mode 2-3 close