AXIOMTEK MANO300 Series, Руководство пользователя

Страница: 14 / 55

MANO300 Mini ITX Motherboard
8 Board and Pin Assignments
Jumper Description Setting
JP2
Clear CMOS
Default: Normal
1-2 Close
JP3
AT/ATX Power Mode Select
Default: ATX Mode
1-2 Close
JP5
LVDS Backlight PWM/CCFL Select
Default: PWM
1-2 Close
JP4
LVDS VDD Select
Default: +3.3V
1-2 Close
JP7
COM1 RS-232/422/485 Mode Select
Default: RS-232
1-2 Close
JP8 3-5, 4-6 Close
JP9 3-5, 4-6 Close
JP10
COM2 RS-232/422/485 Mode Select
Default: RS-232
1-2 Close
JP11 3-5, 4-6 Close
JP12 3-5, 4-6 Close
JP13
COM3 Data/Power Select
Default: RS-232 Data
COM3 Pin 1: DCD# 7-9 Close
COM3 Pin 8: RI# 8-10 Close
2.3.1 Clear CMOS Select (JP2)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing the
CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS,
which includes system setup information such as system passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2. Remove the onboard battery.
3. Move the jumper clip from pins 1-2 (default) to pins 2-3. Keep the clip on pins 2-3
for about 5~10 seconds, then move the clip back to pins 1-2.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
2.3.2 AT/ATX Power Mode Select (JP3)
This 3x1-pin p=2.54mm jumper allows you to select AT or ATX power mode.
Function Setting
Normal operation (Default) 1-2 close
Clear CMOS 2-3 close
Function Setting
ATX mode (Default) 1-2 close
AT mode 2-3 close