AXIOMTEK KIWI310, Руководство пользователя

Страница: 19 / 51

KIWI310 1.8” Board
Board and Pin Assignments 13
2.5.3 Ethernet Port (CN3)
Connection can be established by plugging one end of the Ethernet cable into the RJ-45
connector and the other end (phone jack) to a 1000/100/10-Base-T hub.
L1 L2 L3 L4 L5 L6 L7 L8
A B
A B
2.5.4 USB 3.2 Port (CN4)
The Universal Serial Bus (compliant with USB 3.2 Gen1x1 (5Gb/s)) connector on the
rear I/O is for installing USB peripherals such as keyboard, mouse, scanner, etc.
Pin
1000
Base-T 100/10
Base-T
Description
L1 BI_DA+ TX+ Bidirectional or Transmit Data+
L2 BI_DA- TX- Bidirectional or Transmit Data-
L3 BI_DB+ RX+ Bidirectional or Receive Data+
L4 BI_DC+ N.C. Bidirectional or Not Connected
L5 BI_DC- N.C. Bidirectional or Not Connected
L6 BI_DB- RX- Bidirectional or Receive Data-
L7 BI_DD+ N.C. Bidirectional or Not Connected
L8 BI_DD- N.C. Bidirectional or Not Connected
A
Active Link LED
Off: No link
Blinking: Data activity detected
B
Speed LED
1000: Orange
100/10: Green/OFF
Pin Signal Pin Signal
1 USB_VCC (+5V_SBY ) 10 USB_VCC (+5V_SBY )
2 USB_DN1 11 USB_DN2
3 USB_DP1 12 USB_DP2
4 GND 13 GND
5 SSRX1_N 14 SSRX2_N
6 SSRX1_P 15 SSRX2_P
7 GND 16 GND
8 SSTX1_N 17 SSTX2_N
9 SSTX1_P 18 SSTX2_P