AXIOMTEK IPC972, Руководство пользователя

Страница: 22 / 94

IPC972 Series U
ser’s Manual
14 Introduction
1.6 Jumper Settings
Properly configure jumper settings on the PSB501 to meet your application purpose. Below you
can find a summary table of all jumpers and onboard default settings.
Note: How to setup Jumpers
Illustrations below show that a cap on a jumper is to
“close” the jumper, whereas that off a jumper
is to
“open” the jumper.
[Open] [Closed] [Pin1 -2 Closed]
Jumper Descriptions Setting
JP2 Clear RTC : Normal 1-2 close
JP5&J61 DELAY Function SW 1-2 close
1.6.1 Restore BIOS Optimal Defaults (JP3)
Put jumper clip to pin 2-3 for a few seconds and then move it back to pin 1-2. Doing this
procedure can restore BIOS optimal defaults.
1.6.2 DELAY Function SW (JP5&JP6)
JP6 JP5 function
2-3 close 2-3 close Delay power on 3s
2-3 close 1-2 close Delay power on 6s
1-2 close 1-2 close
Disable delay function
(default)
Function Setting
Normal operation (default) 1-2 close
Restore BIOS optimal defaults 2-3 close